fbpx

Great Engineering BenchMate Bench Top Labeller

    Machine Information

    • The original & best hand label applicator (patented in 1992) produces perfectly positioned labels every time, at a rate of 8 – 12 bottles per minute. Precise, dependable and easy to use, you’ll fall in love with your BenchMATE! Designed to run reliably at the heart of your business for years on end, the BenchMate is virtually unbreakable, in fact we’ve got customers who’ve used theirs without replacement parts or servicing for 25 years! Simply put, the BenchMATE is the best and most reliable hand labeller on the market.

      The BenchMATE easily pays for itself in a very short period of time by saving you time and money every day you use it. No other hand label applicator will give you the non-stop, trouble free, performance this labelling machine is world renowned for. It’s also more flexible than other machines, can handle a wider range of container sizes and can be upgraded to seamlessly integrate with a printer, giving you the capacity to print and apply labels in house, on demand. This facility can save tens of thousands in labelling costs.

      Your labeller is a critical cog in your production process. You can’t fulfil orders on time without it, and as such, it absolutely 100% must be reliable. Cheaper doesn’t save you money when it comes to labelling machines! Production inefficiencies waste your most valuable asset – time – and work out to be very expensive when you measure time and do the maths, especially when your paying people, or if you are time poor, for example working while you start a business. In the 25 years we’ve been in business, we’ve heard it all from disgruntled customers who in frustration threw their old machines away after making the rookie mistake of buying a hand label applicator that was ‘a bit cheaper.’ The real cost is wasted time clearing label jams, complicated time-consuming set ups between rolls, and intermittent sub-standard labelling you have to un-pick & peel by hand, or sell off as seconds. Who in their right mind would go through this for the sake of saving a few hundred dollars?

    • 10x faster

      than labeling by hand.

      Entry level machine

      perfect for startups.

      Simple setup, easy to use.

      Get up and running in under 4 minutes.

    • Diameter:
      – Minimum 55mm (2 3/16 inches) – BenchMATE
      – Minimum 17mm (11/16 inches) – BenchMATE+
      – Maximum 250mm (9 3/4 inches)

      Supported label types:
      – Single, front & back, or wrap-around labels.
      – Pressure sensitive, die-cut, roll-formatted, Fan Folded,
      – Opaque, clear, translucent.

      Supported label sizes:
      – Thickness: Min. 0.02mm (0.002 inches)
      – Length: Greater than 25mm (1 inch)
      – Height:Min. 10mm (3/8 inches)
      Max.186mm (7 5/16 inches) – BenchMATE
      Max. 175mm(6 7/8 inches) – BenchMATE+
      Max. 230mm (9 1/16 inches) with Widebody add-on

      Direction: Left Hand Leading Edge (Internal or Externally wound)

      Label roll dimensions:
      – Diameter:Maximum 300mm (12 inches)
      – Core Diameter: 38mm (11/2 inches) and 76mm (3 inches)

      Estimated Label wastage:
      – 13 cm per roll

      Sensor type:
      – On edge, no registration mark required.

    Packaging Machinery Australia

    Packaging Machinery Australia sell and service a wide range of labelling, case-sealing and packaging equipment with exclusive distribution access to global industry leaders including 3M and Pack Leader.  

    NEWSLETTER SIGN UP
    © Copyright 2018 Packaging Machinery, Australia. All Rights Reserved.